Is the crane below 4m? Is the tipper body down? The height warning box is the solution! The attachment kit is quick and easy to fit and can be retrofitted with little effort.

A box is mounted in the cab that emits light and sound warning signals when the crane is too high, the support beams are extended or the tipper body is up. Other components can be monitored in the same way.

The whole thing is monitored with inductive sensors, which can be mounted in safe positions with a bracket.

The warning signals report until all events are back in transport status. Several signals can be present at the same box, the warning remains until all signals are switched off.

 

 

The audio warning signal can be switched off at the touch of a button, e.g. if you need to make a phone call while working in the cab. When the handbrake is released* or the ignition is switched off and on the audio warning signal also comes back on.

*(Only if the handbrake signal is present.)

Attention! The system only serves as an additional safety aid there is no such thing as total safety, cable break, fuse defective etc.


There is no substitute for the driver's eye for load securing!